JetONE
Fast Acting Plumbing Cleanser for Whirlpools and Spas
jetONE™ utilizes a proprietary blend of alkaline cleansing agents and non-foaming surfactants to penetrate deep inside your whirlpool or spa’s plumbing and equipment to scrub away biofilm and organic, mineral and chemical contaminants. jetONE™ even helps to ‘restart’ rotating jets by eliminating contaminants that clog them. jetONE™ will not cause excessive foaming.
An excellent companion product to the ecoONE® spa treatment line.
Hot Tub/Spa Instructions:
Remove cartridge filter.
Add 1/2 bottle (4 oz. / 113g) of jetONE to existing water.
Run jets on full for one hour.
Drain and throughly rinse spa.
Repeat before every drain and refill.
(For first use or heavily contaminated spas use entire bottle and allow to work for up to 24 hours.)
Whirlpool Bath Instructions:
Fill whirlpool at least 2 inches above suction intake with hot water. Add 4 caps full of jetONE. Circulate on high for 5 to 30 minutes and drain. Refill tub with hot water, circulate jets and drain. Repeat monthly or as needed.
CAUTION: Contains sodium metasilicate, sodium percarbonate, sodium borate and alkaline detergents. Avoid contacts with skin, eyes and mucous membranes.
First Aid: Internal: If swallowed, consume copious amounts of water and call a physician, hospital, or Poison Control Center immediately.
External: Wash off skin immediately.
Eyes: Flush with water for 15 minutes and seek immediate medical attention.
Warning: May be harmful if swallowed
Keep Out of Reach of Children
Save BIG on algae-free pool for next spring: www.ecoONE.biz Coupon Code: CSRFB
